LOCKS FOR LOCKERS

LOCKS FOR LOCKERS

LOCKS FOR LOCKERS

TECHNICAL DESCRIPTION

The lock Mod. G8 with a double mapping made exclusively for Patentverwag Italia.

  • A key with Patentverwag logo, numbered for a prompt and easy replacement
  • Two thousand combinations that guarantee the safety of different locks for the various lockers in every supply
  • Supply of a “passepartout” key
  • Nickel plated brass cylinder, for an extremely robust, safe operation.
  • The outer template and the inner box in moulded nylon
  • Robust vandal-and lock-picking safe structure
  • Lock-picking safety device (see draw.)
  • No screws on the locker front.
  • Template with possibility of applying numbers 01 to 9999.

The lock Mod. G8 is ideal for any kind of locker, both where the lockers are used by several people and if the user is always the same.

s1
s2
s3

S594 Standard key lock
S551 Wing numbering

PADLOCK

TECHNICAL DESCRIPTION

Patentverwag padlocks are the ultimate evolution in this kind of devices thanks to a simple, effective and elegant solution. The turning knob to activate the padlock should be pushed forward and is locked by the padlock in the hole (see illustration). The galvanized steel bolt is in a seat with a click-in cover (see figure) in moulded nylon. The outer template is nylon too and is preset for the application of numbers (01 to 9999). There is a seat for personalization, too if required.

s4
img-serrature
s5

S593 Padlock
S551 wing numbering

KEYBOARD LOCK

TECHNICAL DESCRIPTION

The digital control lock Mod. PV/04 is the ideal solution for those who wish to manage a locker room without using any keys, padlocks, magnetic cards or else. Just select a four-digit number code of your choise. What you have to do to operate this lock is extremely simple. The adopted code can be changed when lock is open, at any time and for as many times as you wish. The energy for closing and opening the lock is provided by three LR03 batteries 1.5 V for over 20.000 operations. By assuming twelve operations per day (six openings and six closings) the batteries last more that four years. A comparative system permits to inhibit the closing if the battery charge is low and cannot guarantee the following re-opening.
The keyboard cover containing the electronic devices and the bolts are moulded in nylon. The lock/locker system is equipped with lock-picking safety device (see the drawing). The keyboard cover has a handle and a seat for numbers 01 to 9999. The digital control lock PV/04 is ideal whenever the locker is used by a single user in that all the troubles of keeping a key or losing it are avoided. The digital lock PV/04 has also a nice advanced design, the most advanced solution in the market.

HOW TO USE IT – WARNINGS
The instructions for using the lock are given in two languages (Italian and English) on the keyboard pad. It is important to remember the following:
• The code to be used can be changed at every full cycle
• Should you forget the opening code use the general passepartout code supplied by the administrator
• Should the bolt find an obstacle while advancing the system would switch to opening automatically. If the obstacle is removed the lock operation ability goes back to normal
• In case of system breakdown the control system would automatically stop the power supply. A red led would start blinking and the system would go off
• Should the battery run down the system will not allow the lock to close if the energy is not enough for a further re-opening

s6
s8
s8

S599 keyboard lock
S557 wing numbering

S51 KEYSYSTEM: coin or token lock

TECHNICAL DESCRIPTIONS

The system Keysystem foresees the Key-lock K97 that holds the key and can be machet with the stainless steel coin-box KASS-X. The key-lock, in two assembled parts, is moulded in special nylon (colour RAL7015), whereas the internal devices are made off aluminium, nylon or stainless steel. If required, the padlock in stainless steel can be modified in order to fit on any kind of locker. Distance from the padlock to the door surface: 3 to max 20 mm. The coin-box is completely made up of stainless steel platter, 15/10 thick, mirror polished, with safetylock.
The main element if the system Keysystem is the key-lock Mod. K/97, which scope is to rationalise the management of changing-room lockers.
The following can occur:
• The user has held the key and lost it. The manager has to use the spare-key. If this event occurs again, he will have to use the master key and order a new key, wasting time and money.
• The user has held the key on purpose, in order to have access to the locker for stealing objects or money. Being this case, the manager will have to face other unpleasant drawbacks.

s9
s12
s10
s12
s11

S511 Mod. K/97 Lock with token or coin
S513 Mod. KASS-X Coin box in stainless steel

Options:
S514: Token in chromatic brass
S559 CLIPS Key numbering with CLIPS-key-ring
S553 MARK Key numbering with MARK-bracelet

FOR FURTHER INFORMATION (TECHNICAL CHARACTERISTICS AND OPERATION OF USE) ASK FOR AND FORWARDING THE CATALOG