Syntec and Syntec Light Partition Walls

Syntec and Syntec Light Partition Walls

Modern structure design for service areas tends to replace traditional partition walls, made of bricks covered by tiles, with HPL laminate panels. The advantages of this innovative system are self explanatory and can be summarized in:
Cheapness: the system permits to divide spaces in very short time and at costs remarkably lower than bricks, tiles, counter-frames, doors and relevant laying work.
Hygiene: washable and disinfectant walls suspended over the floor on adjustable feet with no surface roughness and tile gaps, with no skirting, difficult to sanitize.
Aesthetics: the integration of walls and doors implies an endless surface in the same colour shades.
Life: frames, skirting, tiles and plaster are avoided. This means that nothing can come off, there is nothing to paint and any graffiti can be removed easily

THE FOUR VERSIONS
The Syntec line is available in four versions: the suspended versions (see relating leaflet) and the ground fixed version. These are alternative solutions that meet different requirements. The suspended versions are ideal for installations where sanitation is the essential factor: hospitals, nursing homes, spas, food and pharmaceutical industries.
The ground version is recommended for places of particularly intense use or where improper behaviour or even cases of vandalism may be foreseen: sports facilities, airports, exhibition centres, schools, railway stations and industries in general. All solutions make a great aesthetic impact and are at the same time characterized by the absence of visible fastening devices such as screws, rivets, etc.. This leads to an easy and proper sanitation of the structure and of the flooring in particular. Finally, no maintenance is required and the product lifetime is unlimited

Technical description

The partition walls of Syntec series are composed by 14mm thick high pressure laminate (HPL) panels. The partition walls of Syntec/Light series have 10mm thick HPL panels.
Both Syntec and Syntec/Light series are equipped with the same finishing and support elements: adjustable feet, hinges, door edges, wall fastening elements.
The unique aesthetic difference is a different upper horizontal connection element: in the Syntec series this element has a circular section, the one of the Syntec/Light series has a section made by 2 elliptic elements.

This substantial difference implies that the Syntec/Light series has a price much lower than the Syntec series.
Obviously the Syntec/Light series partition walls have a higher flexibility and a lower resistance to vandalism.

Shower cabin – ground fixed

S 821/A MOD. SE/S
Simple shower partition wall

Panels in high pressure laminate (HPL) of 14mm thickness; superior connection by a profile in extruded anodised natural aluminium. Floor support elements in aluminium and nylon.

S 823/A MOD. SE/L
L-Shaped shower partition wall

Panels in high pressure laminate (HPL) of 14mm thickness; superior connection by a profile in extruded anodised natural aluminium. Floor support elements in aluminium and nylon.
Connection in between walls by special angle profiles in anodised aluminium.

S 825/A MOD. CA/D
Shower cabin

Panels in high pressure laminate (HPL) of 14mm thickness; superior connection by a profile in extruded anodised natural aluminium. Floor support elements in aluminium and nylon. Nylon lock with free/engaged device.

S 827/A MOD. CB/A
Shower cabin with antechamber

Panels in high pressure laminate (HPL) of 14mm thickness; superior connection by a profile in extruded anodised natural aluminium. Floor support elements in aluminium and nylon. Nylon lock with free/engaged device. Antechamber with bench in high pressure laminate..

Shower cabin – suspended

S 831/A MOD. DT/X
Simple suspended shower partition wall

Panels in high pressure laminate (HPL) of 14mm thickness; beam support realised by a couple of profiles in extruded anodised natural aluminium, vertical connected by panels in high pressure laminate of 14mm thickness.

S 833/A MOD. DL/X
Suspended L-shapes shower partition wall

Panels in high pressure laminate (HPL) of 14mm thickness; beam support realised by a couple of profiles in extruded anodised natural aluminium, vertical connected by panels in high pressure laminate of 14mm thickness. Connection in between walls by special angle profiles in anodised aluminium.

S 835/A MOD. DD/X
Suspended shower cabin

Panels in high pressure laminate (HPL) of 14mm thickness. Beam support realised by a couple of profiles in extruded anodised natural aluminium, vertical connected by panels in high pressure laminate of 14mm thickness. Nylon lock with free/engaged device.

S 837/A MOD. DA/X
Suspended shower cabin with antechamber

Panels in high pressure laminate (HPL) of 14mm thickness. Beam support realised by a couple of profiles in extruded anodised natural aluminium, vertical connected by panels in high pressure laminate of 14mm thickness. Nylon lock with free/engaged device. Antechamber with bench in high pressure laminate.

Wc boxes – ground fixed and suspend version

S 842/A MOD. BW/C
WC box with floor fixing

Panels in high pressure laminate (HPL) of 14mm thickness. Superior connection by a profile in extruded anodised natural aluminium. Floor support elements in aluminium and nylon. Nylon lock with free/engaged device.

S 844/A MOD. BW/X
Suspended wc Boxes

Panels in high pressure laminate (HPL) of 14mm thickness. Beam support realised by a couple of profiles in extruded anodised natural alluminium, vertical connected by panels in high pressur laminate of 14mm thickness. Nylon lock with free/engaged device.

Partitions for urinals

Three alternative versions realised in high pressure laminate of 14mm thickness and finishing in aluminium and stainless steel.

The model SIMPLEX/S: with reduced height and foreseen of support panel in stainless steel.
The model MIDDLE/S: complete with floor support and with stainless steel shelf.
The model MAXI/S: with maximum height of cm. 220, complete with floor support and with superior connection in anodised aluminium.

Accessories and options

S690
Push-open locks, MOD. “FORMA”

S696
Soap holder/shelf

S695
Push-open locks, MOD. “NOVA”