|
|
|
|
 |
 |
| |
|
|
| |
|
|
|
|
| |
Patentverwag Italia began work in the
spectator seating sector at the beginning
of the 1970's and then concentrated on
the design and production of shell type
tiered seating, in other words seats for
stadiums, sports halls and sports centres
in general.
It did not take long for the company to
go from its first 7,000 shell type seats
fitted in the new sports hall in Milan
to the completion of important installations.
At present, Patentverwag produces a range
of tiered seating that includes models
ZERO, UNO, DUE and TRE featuring different
backrest heights, two lines of seats with
fold-down backrest or seat including models
ZX and ZY and two lines of armchairs that
can be fitted in stalls and on tiers:
the lines LTD and SPA.
A wide range of products that are suitable
for equipping fixed prefabricated grandstands
as well as telescopic grandstands.
The models of the tiered seating range
have some common features such as the
design and the finishes.The range varies
from the model ZERO, without a backrest
and of reduced sizes, to the UNO seat
that has a very low backrest 12 centimetres
in height, the DUE seat featuring a medium
height backrest to the most comfortable
seat the model TRE with a backrest more
than 30 cm. in height.
The seat models UNO, DUE and TRE are designed
in such a way that due to their shape
they can be fitted with a supporting frame
without the need for screws or other securing
devices. This securing system which consists
of inserting two horizontal tubes into
the structure of the seat, allows the
seats to be fitted on two types of framework:
the projecting "console" type,
to be used in the case of steep tiers,
and the one with a simple support to fit
the seats on to tiers less than 30-35
cm. in height.
The ZERO and UNO seat models are designed
in such a way that they can be joined
together to create continuous benches
of any length and they can also be fitted
on telescopic grandstands instead of the
traditional wooden or aluminium benches.
The model ZX and ZY seats are typical
models for telescopic grandstands even
if they can also be fitted on brick-built
tiers or on metal grandstands of the fixed
type.
The two lines of armchairs LTD and SPA
constitute the top of the Patentverwag
range and have been used in prestigious
installations such as meeting rooms, for
theatre seating and university lecture
rooms.Consisting of a steel framework
and seats moulded in polypropylene or
padded seats, the two lines offer excellent
characteristics.
The reduced width facilitates access and
movement along the tiers and ranges from
ten centimetres when the armchair is folded
to a seat over fifty-eight centimetres
deep when in use.
From the 1980's onwards, Patentverwag
has furnished hundreds of grandstands,
fitting more than 60,000 seats on telescopic
grandstands and over 300,000 seats on
fixed grandstands.
A few references: the S. Siro Stadium
in Milan, the Stadium in Brescia, the
Vallelunga Circuit, the Stadium in Aleppo,
Syria and hundreds of other prestigious
installations in Europe and the Middle
East.
|
| |
|
|
|
|
Anatomical
seats without a backrest,
the ideal solution for
stadium grandstands and
sports halls - an economic
solution with a qualified
design.
|
|
|
|
|
|
|
|
|
Extruded
aluminium bench-style
seating. Ideal for outdoor
installations, the seating
features a proverbial
resistance to bad weather,
shocks and acts of vandalism.
|
|
|
|
| |
|
|
|
|
They represent
a solution half way between
the UNO/PL seats and the
TRE/PL seats, with a medium
height backrest. The seats
are very comfortable and
are ideal for outdoor
and indoor grandstands.
|
|
|
|
|
|
|
|
|
Provided
with a high backrest,
the TRE/PL seats represent
the most comfortable solution
for equipping prestigious
grandstands in gyms, stadiums
and wherever events of
a longer duration are
held.
|
|
|
|
|
| |
| |
| |
|
|
|